How to Activate an Evaluation License for Cisco Router ISR G2 (Example data feature)

Posted on Updated on


With this example, I will show you how to activate the data feature licence on cisco router with ipbase licence.
2921-01#sh license
Index 1 Feature: ipbasek9
Period left: Life time
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
License Priority: Medium
Index 2 Feature: securityk9_npe
Period left: Life time
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
License Priority: Medium
Index 3 Feature: uck9
Period left: Life time
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
License Priority: Medium
Index 4 Feature: datak9
Period left: Not Activated
Period Used: 0 minute 0 second
License Type: EvalRightToUse
License State: Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
Index 5 Feature: gatekeeper
Period left: Not Activated
Period Used: 0 minute 0 second
License Type: EvalRightToUse
License State: Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
Index 6 Feature: ios-ips-update
Period left: Not Activated
Period Used: 0 minute 0 second
License Type: EvalRightToUse
License State: Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
Index 7 Feature: SNASw
Period left: Not Activated
Period Used: 0 minute 0 second
License Type: EvalRightToUse
License State: Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
Index 8 Feature: cme-srst
Period left: Life time
License Type: RightToUse
License State: Active, In Use
License Count: 25/0 (In-use/Violation)
License Priority: Low
Index 9 Feature: WAAS_Express
Period left: Not Activated
Period Used: 0 minute 0 second
License Type: EvalRightToUse
License State: Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
Index 10 Feature: UCVideo
Period left: Not Activated
Period Used: 0 minute 0 second
License Type: EvalRightToUse
License State: Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None

2921-01#sh version
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9_NPE-M), Version 15.2(3)T, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Fri 23-Mar-12 16:57 by prod_rel_team

ROM: System Bootstrap, Version 15.0(1r)M15, RELEASE SOFTWARE (fc1)

2921-01 uptime is 1 week, 4 days, 17 hours, 42 minutes
System returned to ROM by power-on
System restarted at 22:39:50 MSK Sun Mar 24 2013
System image file is “flash:c2900-universalk9_npe-mz.SPA.152-3.T.bin”
Last reload type: Normal Reload
Last reload reason: power-on

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

Cisco CISCO2921/K9 (revision 1.0) with 479232K/45056K bytes of memory.
Processor board ID @@@@@@
3 Gigabit Ethernet interfaces
31 Serial interfaces
1 terminal line
1 Channelized E1/PRI port
2 Voice FXS interfaces
DRAM configuration is 64 bits wide with parity enabled.
255K bytes of non-volatile configuration memory.
250880K bytes of ATA System CompactFlash 0 (Read/Write)

License Info:

License UDI:

————————————————-
Device# PID SN
————————————————-
*0 CISCO2921/K9 @@@@@

Technology Package License Information for Module:’c2900′

—————————————————————–
Technology Technology-package Technology-package
Current Type Next reboot
——————————————————————
ipbase ipbasek9 Permanent ipbasek9
security securityk9_npePermanent securityk9_npe
uc uck9 Permanent uck9
data None None None

Configuration register is 0x2102

2921-01#conf t
2921-01(config)#license boot module c2900 technology-package data
PLEASE READ THE FOLLOWING TERMS CAREFULLY. INSTALLING THE LICENSE OR
LICENSE KEY PROVIDED FOR ANY CISCO PRODUCT FEATURE OR USING SUCH
PRODUCT FEATURE CONSTITUTES YOUR FULL ACCEPTANCE OF THE FOLLOWING
TERMS. YOU MUST NOT PROCEED FURTHER IF YOU ARE NOT WILLING TO BE BOUND
BY ALL THE TERMS SET FORTH HEREIN.

Use of this product feature requires an additional license from Cisco,
together with an additional payment. You may use this product feature
on an evaluation basis, without payment to Cisco, for 60 days. Your use
of the product, including during the 60 day evaluation period, is
subject to the Cisco end user license agreement
http://www.cisco.com/en/US/docs/general/warranty/English/EU1KEN_.html
If you use the product feature beyond the 60 day evaluation period, you
must submit the appropriate payment to Cisco for the license. After the
60 day evaluation period, your use of the product feature will be
governed solely by the Cisco end user license agreement (link above),
together with any supplements relating to such product feature. The
above applies even if the evaluation license is not automatically
terminated and you do not receive any notice of the expiration of the
evaluation period. It is your responsibility to determine when the
evaluation period is complete and you are required to make payment to
Cisco for your use of the product feature beyond the evaluation period.

Your acceptance of this agreement for the software features on one
product shall be deemed your acceptance with respect to all such
software on all Cisco products you purchase which includes the same
software. (The foregoing notwithstanding, you must purchase a license
for each software feature you use past the 60 days evaluation period,
so that if you enable a software feature on 1000 devices, you must
purchase 1000 licenses for use past the 60 day evaluation period.)

Activation of the software command line interface will be evidence of
your acceptance of this agreement.

ACCEPT? [yes/no]: y
% use ‘write’ command to make license boot config take effect on next boot
2921-01#wr
Building configuration…

[OK]
2921-01#reload

2921-01# sh version
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9_NPE-M), Version 15.2(3)T, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Fri 23-Mar-12 16:57 by prod_rel_team

ROM: System Bootstrap, Version 15.0(1r)M15, RELEASE SOFTWARE (fc1)

2921-01 uptime is 2 minutes
System returned to ROM by reload at 16:27:26 MSK Fri Apr 5 2013
System restarted at 16:28:42 MSK Fri Apr 5 2013
System image file is “flash:c2900-universalk9_npe-mz.SPA.152-3.T.bin”
Last reload type: Normal Reload
Last reload reason: Reload Command

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

Cisco CISCO2921/K9 (revision 1.0) with 479232K/45056K bytes of memory.
Processor board ID FCZ1626215W
3 Gigabit Ethernet interfaces
31 Serial interfaces
1 terminal line
1 Channelized E1/PRI port
2 Voice FXS interfaces
DRAM configuration is 64 bits wide with parity enabled.
255K bytes of non-volatile configuration memory.
250880K bytes of ATA System CompactFlash 0 (Read/Write)

License Info:

License UDI:

————————————————-
Device# PID SN
————————————————-
*0 CISCO2921/K9 FCZ1626215W

Technology Package License Information for Module:’c2900′

—————————————————————–
Technology Technology-package Technology-package
Current Type Next reboot
——————————————————————
ipbase ipbasek9 Permanent ipbasek9
security securityk9_npePermanent securityk9_npe
uc uck9 Permanent uck9
data datak9 EvalRightToUse datak9

Configuration register is 0x2102

Advertisements

5 thoughts on “How to Activate an Evaluation License for Cisco Router ISR G2 (Example data feature)

    Jh0n said:
    August 29, 2013 at 2:06 AM

    Very helpful your post.
    Thanks

    Like

      tnotez responded:
      September 2, 2013 at 9:01 AM

      Am glad. Thank you.

      Like

    ghjkhgjk said:
    November 4, 2013 at 4:32 PM

    wonderful post thanks

    Like

    Terry said:
    September 16, 2015 at 12:34 AM

    Saved my buns, Thanks!

    Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s