Boot Brocade switch as a Layer 3 device from Secondary flash

Posted on Updated on


Confirm that the router image is installed.

ICX6610-24 Switch#show flash
Stack unit 1:
Compressed Pri Code size = 5320842, Version:07.3.00aT7f1 (/foundry/FGS/os/FCXS07300a.bin)
Compressed Sec Code size = 6803305, Version:07.3.00aT7f3 (/foundry/FGS/os/FCXR07300a.bin)
Compressed Boot-Monitor Image size = 369491, Version:07.3.01T7f5
Code Flash Free Space = 52822016

Configure the switch to reboot from the secondary image.
ICX6610-24 Switch#boot system flash sec
secondary From Secondary image flash
ICX6610-24 Switch#boot system flash secondary
Are you sure? (enter ‘y’ or ‘n’): y
Halt and reboot
Rebooting(2)…
*
$
ICX Boot Code Version 7.3.01 (grz07301)
Enter ‘a’ to stop at memory test
Enter ‘b’ to stop at boot monitor
BOOT INFO: load monitor from boot flash, cksum = b4d2
BOOT INFO: verify flash files………
BOOT INFO: load image from secondary copy…

platform type = 8
PCIE-1 LTSSM status: 22
PCIE Switch status: 0
…………………
…..
Starting Main Task …CPSS DxCh Version: cpss3.4 release
Pre Parsing Config Data …

Parsing Config Data …

Copyright (c) 1996-2011 Brocade Communications Systems, Inc.
UNIT 1: compiled on Dec 02 2011 at 11:46:03 labeled as FCXR07300a
(6803305 bytes) from Secondary /foundry/FGS/os/FCXR07300a.bin
SW: Version 07.3.00aT7f3
Boot-Monitor Image size = 369491, Version:07.3.01T7f5 (grz07301)
HW: Stackable ICX6610-24
==========================================================================
UNIT 1: SL 1: ICX6610-24 24-port Management Module
Serial #: BXP2551H0BX
License: ICX6610_BASE_ROUTER_SOFT_PACKAGE (LID: dzrHKKGjFdz)
P-ENGINE 0: type E02B, rev 01
==========================================================================
UNIT 1: SL 2: ICX6610-QSFP 10-port 160G Module
==========================================================================
UNIT 1: SL 3: ICX6610-8-port Dual Mode(SFP/SFP+) Module
==========================================================================
800 MHz Power PC processor 8544E (version 0021/0023) 400 MHz bus
65536 KB flash memory
512 MB DRAM
STACKID 1 system uptime is 9 seconds
The system : started=warm start reloaded=by “reload”

……………………
ICX6610-24 Router>
Power supply 2 detected.
Power supply 2 is up.

ICX6610-24 Router>en
No password has been assigned yet…
ICX6610-24 Router#

 

Note that the hostname has not changed to ICX6610-24 Router

Advertisements

2 thoughts on “Boot Brocade switch as a Layer 3 device from Secondary flash

    virtual offices wyoming said:
    August 1, 2013 at 7:16 PM

    Wow, superb blog layout! How long have you been blogging for?

    you make blogging look easy. The overall look of your web site is fantastic, let alone the content!

    Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s