Aruba 3200XM – Initial Configuration – Part 1

Posted on Updated on


Got a larger toy 🙂

Initialization Wizard via Console

Loading image 0:0##############################################################################################################################################################################################################################################################################################################
Image is signed; verifying checksum…
passed
Signer Cert OK
Policy Cert OK
RSA signature verified.

Booting image…
Uncompressing core image files… 00:00:07 done. 00:00:42

Aruba Networks
ArubaOS Version 6.1.3.6 (build 36470 / label #36470)
Built by p4build@corsica.arubanetworks.com on 2012-12-11 at 12:51:05 PST (gcc versio
Copyright (c) 2002-2012, Aruba Networks, Inc.

<<<<< Welcome to Aruba Networks – Aruba A3200 >>>>>

Performing CompactFlash fast test… Checking for file system…
Passed.
Performing integrity check on Ancillary partition 0…passed.
Reboot Cause: Power Failure.
Downloading SOS…done.
Deleting the Databases
Restoring the database…done.
Generating SSH Keys……done.
Initializing TPM and Certificates
Generating a 2048 bit RSA private key
………..+++
……………..+++
writing new private key to ‘/tmp/tempCertKey/priveKeyGen.pem’
—–
TPM and Certificate Initialization successful.
Reading configuration from factory-default.cfg

***************** Welcome to the Aruba3200 setup dialog *****************
This dialog will help you to set the basic configuration for the switch.
These settings, except for the Country Code, can later be changed from the
Command Line Interface or Graphical User Interface.

Commands: <Enter> Submit input or use [default value], <ctrl-I> Help
<ctrl-B> Back, <ctrl-F> Forward, <ctrl-A> Line begin, <ctrl-E> Line end
<ctrl-D> Delete, <BackSpace> Delete back, <ctrl-K> Delete to end of line
<ctrl-P> Previous question <ctrl-X> Restart beginning

Enter System name [Aruba3200]: Aruba3200-Test
Enter Switch Role (master|local|standalone|remote-node) [master]: st
The switch can be configured as local or master. The master switch
will have global configuration and will distribute it to the local switches.
If there is a single switch, it should be configured as master.
Enter Switch Role (master|local|standalone|remote-node) [master]: standalone
Enter VLAN 1 interface IP address [172.16.0.254]: 10.2.221.200
Enter VLAN 1 interface subnet mask [255.255.255.0]:
Enter IP Default gateway [none]: 10.2.221.2
Enter Country code (ISO-3166), <ctrl-I> for supported list: RU
You have chosen Country code RU for Russia (yes|no)?: y
Enter Time Zone [PST-8:0]:
Enter Time in UTC [06:24:57]: 23:08
Enter Time in UTC [06:24:57]: 18:25:00
Enter Date (MM/DD/YYYY) [8/24/2013]: 8/24/2013
Enter Password for admin login (up to 32 chars): ********
Re-type Password for admin login: ********
Enter Password for enable mode (up to 15 chars): ******
Re-type Password for enable mode: ******
Do you wish to shutdown all the ports (yes|no)? [no]:

Current choices are:

System name: Aruba3200-Test
Switch Role: standalone
VLAN 1 interface IP address: 10.2.221.200
VLAN 1 interface subnet mask: 255.255.255.0
IP Default gateway: 10.2.221.2
Country code: RU
Time Zone: PST-8:0
Ports shutdown: no

If you accept the changes the switch will restart!
Type <ctrl-P> to go back and change answer for any question
Do you wish to accept the changes (yes|no)y
Creating configuration… Done.

System will now restart!

Shutdown processing started
Syncing data….done.
Sending SIGKILL to all processes.
Please stand by while rebooting the system.
2:<7>ide-disk 0.0: shutdown
2:<0>Restarting system.
2:.
2:<2>Performing hard reset…

CPBoot 1.3.1.0 (build 35189)
Built: 2012-09-06 at 16:05:15
DRAM: Operating at 533 MHz
DRAM: Channel 0: 1024 MB
DRAM: Channel 2: 0 MB
DRAM: Total = 1024 MB
POST: QUICK MEMORY TEST
Memory test: Physical 0x00000000 – 0x02000000 – address pattern
Memory test: Physical 0x00000000 – 0x02000000 – invr addr pattern
Memory test: Physical 0x00000000 – 0x02000000 – Mod3 pattern
Memory test: Physical 0x10000000 – 0x12000000 – address pattern
Memory test: Physical 0x10000000 – 0x12000000 – invr addr pattern
Memory test: Physical 0x10000000 – 0x12000000 – Mod3 pattern
PASS
CPU: XLR508 rev. C4 Clock: 800MHz
Board: A3200
CPLD: rev: 1.3
SMP: All 8 cpus successfully started
Boot: Primary bootflash partition
POST2: OK
Net: xlr_gmac0 xlr_gmac1 xlr_gmac2 xlr_gmac3
IDE: Bus 0: OK
Device 0: Model: CF 512MB Firm: 20100924 Ser#: 2012C 0000091383
Type: Removable Hard Disk
Capacity: 502.0 MB = 0.4 GB (1028160 x 512)

Hit any key to stop autoboot: 0
Loading image 0:0##############################################################################################################################################################################################################################################################################################################
Image is signed; verifying checksum…
passed
Signer Cert OK
Policy Cert OK
RSA signature verified.

Booting image…
Uncompressing core image files… 00:00:07 done. 00:00:42

Aruba Networks
ArubaOS Version 6.1.3.6 (build 36470 / label #36470)
Built by p4build@corsica.arubanetworks.com on 2012-12-11 at 12:51:05 PST (gcc versio
Copyright (c) 2002-2012, Aruba Networks, Inc.

<<<<< Welcome to Aruba Networks – Aruba A3200 >>>>>

Performing CompactFlash fast test… Checking for file system…
Passed.
Performing integrity check on Ancillary partition 0…passed.
Reboot Cause: User reboot.
Downloading SOS…done.
Restoring the database…done.
Generating SSH Keys……done.
Initializing TPM and Certificates
TPM and Certificate Initialization successful.
Performing intra-version configuration upgrade for version 6.1.
Saving current config file default.cfg as default.cfg.2013-08-24_18-28-56
Generating new configuration.
Configuration upgrade complete.
Reading configuration from default.cfg
Retrieving Configuration…will take approximately 1 minute

(Aruba3200-Test)
User: admin
Password: ********
(Aruba3200-Test) >enable
Password:******
(Aruba3200-Test) #

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s